- 1500-nit sunlight-readable display The screen stays readable in direct sunlight, which matters at substations, construction sites and open patrol routes.
- 1920 × 1200 resolution A sharp view of the control interface and the on-screen information during operation.
- 20,000 mAh, 6 to 8 hours Rated to cover a full shift and outlast more than one of the robot's own battery swaps.
- Android 13 A familiar platform for the M1 control application.
- 2.4 GHz and 5.8 GHz Dual-band operation gives a choice of frequency in different radio environments, where local rules permit both.
- Complete field kit Controller, charger and carrying case ship together, so it arrives ready to use and travels protected.
Description
The Genisom M1 works in rain, dust, heat and cold for hours at a time, and the handheld in the operator's hands has to keep up. This is the kit built for that: a 1500-nit display that stays readable in direct sunlight, a 1920 × 1200 screen for the control interface, and a 20,000 mAh battery rated for 6 to 8 hours — long enough to cover a shift and outlast more than one robot battery swap.
It runs Android 13, which gives the M1 control application a familiar platform, and works on both 2.4 GHz and 5.8 GHz, so an operator has a choice of band in a congested radio environment. Confirm that both bands are permitted where you intend to operate.
The kit arrives complete: controller, charger and a carrying case. At 277 × 138 × 96 mm and 1.2 kg it is a two-handed field instrument rather than a pocket remote — which is the point when the job is a substation round in full daylight, a long supervised patrol, or driving the robot through mapping and route planning before autonomous runs.
It is the M1's controller. The compact L1 series uses a much lighter 261 g handheld with a 4.7-inch screen and live video from the robot. The controller's own weather rating and its control range are confirmed in writing before the order — the IP67 rating belongs to the M1.
Key Capabilities
- 1500-nit sunlight-readable display: The screen stays readable in direct sunlight, which matters at substations, construction sites and open patrol routes.
- 1920 × 1200 resolution: A sharp view of the control interface and the on-screen information during operation.
- 20,000 mAh, 6 to 8 hours: Rated to cover a full shift and outlast more than one of the robot's own battery swaps.
- Android 13: A familiar platform for the M1 control application.
- 2.4 GHz and 5.8 GHz: Dual-band operation gives a choice of frequency in different radio environments, where local rules permit both.
- Complete field kit: Controller, charger and carrying case ship together, so it arrives ready to use and travels protected.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Genisom |
|---|---|
| Model | M1 Controller |
| Product type | Handheld field controller (accessory) |
| Compatible robot | Genisom M1 — confirm against your edition and software version |
| What's in the box | Controller × 1, charger × 1, carrying case × 1 |
| Display brightness | 1500 nit, sunlight readable |
| Resolution | 1920 × 1200 |
| Battery | 20,000 mAh |
| Battery life | 6 to 8 hours |
| Operating system | Android 13 |
| Operating frequency | 2.4 GHz / 5.8 GHz |
| Dimensions | 277 × 138 × 96 mm |
| Weight | 1.2 kg |
| Control range | Confirm at quote |
| Ingress rating | Confirm at quote — the IP67 rating applies to the robot |
Industries
Frequently Asked Questions
One controller, one charger and one carrying case.
Yes. The display is rated at 1500 nits and designed to stay readable in direct sunlight.
The 20,000 mAh battery is rated for 6 to 8 hours, which covers a shift and more than one of the robot's own pack swaps.
No. The L1's handheld is a 261 g unit with a 4.7-inch screen and live video from the robot. This is a 1.2 kg field controller for the industrial M1.
The IP67 rating belongs to the M1, so the controller's own ingress rating is confirmed in writing if it will be used in rain or heavy dust.
The Genisom M1 Controller is priced at QAR 3,560 in your market.
Recently Viewed
You haven't viewed any products yet.
