- 11 N·m peak at 101:1 The higher ratio gives 11 N·m peak and 8.9 N·m allowable at average load, at up to 59 RPM.
- Backlash tightens with the ratio Gear backlash is 40 arcsec at 51:1 and 30 arcsec at 101:1.
- 12 mm hollow shaft Twice the bore of the 30-40 frame, so heavier cable bundles pass through the rotation axis.
- 90 W electrical platform All builds run from 24–48 V at 2 A rated and 3 A maximum continuous current, with a 0.05 N·m/A torque constant.
- Three fully specified builds 62 mm at 0.32 kg for the base unit, 82 mm at 0.42 kg for the extended -B body, and 64.5 mm at 0.37 kg for the -2E-EC.
- EtherCAT on the -2E-EC build Base and -B builds use CAN with a 16-bit encoder; the -2E-EC adds a 16/18-bit encoder option and EtherCAT for deterministic multi-axis control.
- Fourth build confirmed at quote The -B-2E-EC designation combines the -B and -2E-EC suffixes, and its figures are confirmed with the quotation.
Description
The CRA-RI40-52 is the second step up the Ti5 joint module line: 11 N·m of peak torque at the 101:1 ratio from a 0.32 kg base build, on a 12 mm hollow shaft. It doubles the shaft bore and more than doubles the torque of the 30-40 frame for about 130 g more mass, which makes it the usual choice for elbow and small-shoulder axes on lightweight arms.
Two ratios are offered and they differ in more than torque. At 51:1 the module gives 8.3 N·m peak, 5.5 N·m allowable at average load and up to 118 RPM, with 40 arcsec of gear backlash. At 101:1 it gives 11 N·m peak, 8.9 N·m allowable and up to 59 RPM, and backlash tightens to 30 arcsec — so the slower ratio is also the more precise one.
The electrical platform is shared across the builds: 90 W rated, 24–48 V, 2 A rated and 3 A maximum continuous current, with a 0.05 N·m/A torque constant. The base build measures 62 mm at 0.32 kg; the extended -B body 82 mm at 0.42 kg with noticeably higher rotor inertia; the -2E-EC 64.5 mm at 0.37 kg, adding a 16/18-bit encoder option and EtherCAT alongside CAN. The -B-2E-EC designation completes the family, and its figures are confirmed with the quotation.
Like the rest of the line it is a component, not a machine: structure, controller, power and software are the integrator's. Humanoid limbs, lightweight collaborative arms, research prototypes and automation fixtures where a 90 W integrated joint replaces a separate motor, gearbox and encoder stack are the typical destinations.
Key Capabilities
- 11 N·m peak at 101:1: The higher ratio gives 11 N·m peak and 8.9 N·m allowable at average load, at up to 59 RPM.
- Backlash tightens with the ratio: Gear backlash is 40 arcsec at 51:1 and 30 arcsec at 101:1.
- 12 mm hollow shaft: Twice the bore of the 30-40 frame, so heavier cable bundles pass through the rotation axis.
- 90 W electrical platform: All builds run from 24–48 V at 2 A rated and 3 A maximum continuous current, with a 0.05 N·m/A torque constant.
- Three fully specified builds: 62 mm at 0.32 kg for the base unit, 82 mm at 0.42 kg for the extended -B body, and 64.5 mm at 0.37 kg for the -2E-EC.
- EtherCAT on the -2E-EC build: Base and -B builds use CAN with a 16-bit encoder; the -2E-EC adds a 16/18-bit encoder option and EtherCAT for deterministic multi-axis control.
- Fourth build confirmed at quote: The -B-2E-EC designation combines the -B and -2E-EC suffixes, and its figures are confirmed with the quotation.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Ti5 Robotics |
|---|---|
| Model Family | CRA-RI40-52-PRO-2 |
| Product Type | Integrated rotary joint module (motor, gearing, encoder, drive) |
| Builds | -XXX (base), -XXX-B (extended body), -XXX-2E-EC (dual encoder, EtherCAT) |
| Further Build | -XXX-B-2E-EC — confirm at quote |
| Gear Ratios | 51:1, 101:1 |
| Peak Torque | 51:1 — 8.3 N·m; 101:1 — 11 N·m |
| Max Allowable Torque at Average Load | 51:1 — 5.5 N·m; 101:1 — 8.9 N·m |
| Rated Torque at 2000 RPM Input | 51:1 — 3.5 N·m; 101:1 — 5 N·m |
| Peak Speed | 51:1 — 118 RPM; 101:1 — 59 RPM |
| Rated Speed at Half Rated Torque | 51:1 — 80 RPM; 101:1 — 40 RPM |
| Gear Backlash | 51:1 — 40 arcsec; 101:1 — 30 arcsec |
| Rated Power | 90 W |
| Supply Voltage | 24–48 V |
| Rated Current | 2 A |
| Max Continuous Current | 3 A |
| Torque Constant | 0.05 N·m/A |
| Encoder Resolution | 16-bit (base, -B); 16/18-bit option on -2E-EC |
| Communication Bus | CAN (base, -B); CAN or EtherCAT on -2E-EC |
| Hollow Shaft | 12 mm |
| Length | 62 ±0.5 mm base; 82 ±0.5 mm -B; 64.5 ±0.5 mm -2E-EC |
| Mass | 0.32 kg base; 0.42 kg -B; 0.37 kg -2E-EC |
| Rotor Inertia | 73 g·cm² base; 116.2 g·cm² -B; 85.14 g·cm² -2E-EC |
| Ingress Protection | Confirm at quote |
| Operating Temperature | Confirm at quote |
| Price | Quotation only |
Industries
Frequently Asked Questions
Two: 51:1, with 8.3 N·m peak torque at up to 118 RPM and 40 arcsec backlash, and 101:1, with 11 N·m peak at up to 59 RPM and 30 arcsec backlash.
It sits between them. Peak torque is roughly double the 30-40's at 11 N·m against 4.8 N·m, on a 12 mm bore instead of 6 mm and 90 W instead of 36 W. The 50-60 frame goes further again, to 34 N·m at 150 W with 10 arcsec backlash at its top ratio.
Masses are 0.32 kg for the base build, 0.37 kg for the -2E-EC and 0.42 kg for the extended -B body. The -B-2E-EC mass is confirmed with the quotation.
The base and -B builds communicate over CAN with a 16-bit encoder. The -2E-EC build comes with CAN or EtherCAT and a 16/18-bit encoder option.
Yes, 12 mm on all builds, which allows cabling to pass through the joint axis for a cleaner limb design.
It is offered by quotation. Version, gear ratio or configuration, quantity and delivery are confirmed per project, and the price is set in the quotation.
Recently Viewed
You haven't viewed any products yet.
