- Three fingers, nine joints Three identical fingers with three active joints each keep the kinematics simple; it is the only Allegro Hand without a thumb.
- Current-controlled joints All nine joints are independent and current-controlled, so a controller sets joint effort during a grasp, not only position.
- 360° pressure-sensing fingertips Each fingertip is a finger-shaped sensor that measures air pressure in every direction through a capacitive element, with a stiffness close to a human finger.
- Colour that follows contact The fingertip changes colour with tactile sensitivity, so contact shows at a glance without a monitoring screen.
- 1.6 Nm at the second joint Standard joints run 288.35:1 for 0.92 Nm stall torque; the second joint of each finger runs 159.59:1 for 1.6 Nm.
- 12 kg payload at 1,050 g The hand weighs 1,050 g and carries up to 12 kg, depending on the measurement method.
- UXD software, CAN at 500 Hz Allegro Hand UXD monitors the hand, builds poses and drives motions from buttons, alongside ready-made grasping algorithms, over 500 Hz CAN.
Description
The Wonik Allegro Hand V5 is Wonik Robotics' three-finger dexterous robotic hand: three identical fingers with three active joints each, 9 degrees of freedom in all, every joint independently current-controlled. It is the only Allegro Hand without an opposing thumb, and Wonik positions it as a low-cost platform for dexterous manipulation in research and industry.
Every fingertip is a 360° omnidirectional tactile sensor shaped like a finger. A capacitive element measures the air pressure inside it, the tip has a stiffness close to a human finger, and its colour changes with tactile sensitivity, so contact is visible at a glance. With ready-made grasping algorithms for different object shapes, the V5 handles objects from rigid parts to soft, deformable materials, which suits grasping research and industrial manipulation.
Standard joints run a 288.35:1 reduction for 0.92 Nm stall and 0.23 Nm nominal torque, and the second joint of each finger runs 159.59:1 for 1.6 Nm stall and 0.48 Nm nominal. Joint resolution is 0.088°; the hand weighs 1,050 g and carries up to 12 kg, depending on the measurement method. Fingertip types A to D change how the silicone surface is supported, for a firm, delicate, strong or lateral grip. Control runs over CAN at 500 Hz on a 24.0 V, 5.0 A supply, with the Allegro Hand UXD application for monitoring, pose generation and motion control.
Need a thumb? The Allegro Hand V5 Plus uses the same fingertip sensors on three fingers and a thumb with 16 joints and a 15 kg payload, and the Allegro Hand V5 Sense adds pressure sensing at the finger joints. The Allegro Hand V4 is the earlier torque-controlled four-finger hand without tactile sensing, and the Allegro Hand V6 F has five fingers. Compare all of our dexterous robotic hands.
Key Capabilities
- Three fingers, nine joints: Three identical fingers with three active joints each keep the kinematics simple; it is the only Allegro Hand without a thumb.
- Current-controlled joints: All nine joints are independent and current-controlled, so a controller sets joint effort during a grasp, not only position.
- 360° pressure-sensing fingertips: Each fingertip is a finger-shaped sensor that measures air pressure in every direction through a capacitive element, with a stiffness close to a human finger.
- Colour that follows contact: The fingertip changes colour with tactile sensitivity, so contact shows at a glance without a monitoring screen.
- 1.6 Nm at the second joint: Standard joints run 288.35:1 for 0.92 Nm stall torque; the second joint of each finger runs 159.59:1 for 1.6 Nm.
- 12 kg payload at 1,050 g: The hand weighs 1,050 g and carries up to 12 kg, depending on the measurement method.
- UXD software, CAN at 500 Hz: Allegro Hand UXD monitors the hand, builds poses and drives motions from buttons, alongside ready-made grasping algorithms, over 500 Hz CAN.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Wonik Robotics |
|---|---|
| Model | Allegro Hand V5 |
| Fingers | 3 (no thumb) |
| Degrees of freedom | 9 active (3 per finger) |
| Joint control | Independent current control on every joint |
| Actuation | DC motors |
| Gear ratio | 288.35:1; 159.59:1 at the second joint of each finger |
| Stall torque | 0.92 Nm; 1.6 Nm at the second joint |
| Nominal torque | 0.23 Nm; 0.48 Nm at the second joint |
| Joint resolution | 0.088° |
| Payload | 12 kg (depending on the measurement method) |
| Weight | 1,050 g |
| Fingertip sensing | 360° omnidirectional pressure sensor in every fingertip; air pressure measured by a capacitive sensor; stiffness similar to a human finger |
| Fingertip colour | Changes with tactile sensitivity |
| Fingertip types | A (default, firm grip), B (delicate objects), C (strong grip), D (lateral grip) |
| Communication | CAN, 500 Hz |
| Power | 24.0 V, 5.0 A, 120 W |
| Software | Allegro Hand UXD (monitoring, pose generation, motion control); ready-made grasping algorithms; real-time control and online simulation |
| CE marking | Yes (SZUTEST attestation SZT-25MA36171-1, 2025) |
| Arm mounting adapter | Confirm at quote |
Industries
Frequently Asked Questions
It is offered by quotation — configuration, quantity and delivery are confirmed per project.
Three fingers and no thumb, with three active joints each: 9 degrees of freedom, all independently current-controlled. For a thumb and 16 joints, choose the Allegro Hand V5 Plus.
Each fingertip is a 360° omnidirectional pressure sensor shaped like a finger: a capacitive element measures the air pressure inside it, and the surface changes colour with tactile sensitivity.
It weighs 1,050 g and carries up to 12 kg, depending on the measurement method.
Type A is the default, with internal support for a firm grip. Type B moves the support outside for delicate objects, Type C is shorter and senses only its upper part for a strong grip, and Type D has wide rear support for lateral grips.
Over CAN at 500 Hz, on a 24.0 V, 5.0 A supply. Allegro Hand UXD gives real-time monitoring, pose generation and motion control, with ready-made grasping algorithms; mounting to your arm is confirmed with the quotation.
Wonik Allegro Hand V5 Three-Finger Dexterous Hand
- Regular price
- Request Quote for Price
Recently Viewed
You haven't viewed any products yet.
